Extreme impregnating agent

The substrate should be clean and dry (max. 20% moisture content). Old coatings such as varnish, enamel and stain varnish should be removed. Sand the parts to be impregnated to remove any loose parts of the previous coating. Bare wood should be pre-treated with the colourless biocide Xylorit.

The product is ready to use. Do not dilute. Stir thoroughly before use. Repeat during application. Application temperature: min. 10°C, max. 25°C. Apply 2 layers of the impregnating agent to the prepared wood. Apply the second layer after approx. 2 h. Protect the surface from water, dust and dirt after each coat. To avoid differences in colour, it is recommended that a product with the same production batch number is used to coat the entire surface, or alternatively that products from several containers with different batch numbers are mixed.

Note! Due to printing limitations, the colour shown on the packaging is for illustrative purposes only and cannot be used as a reason for complaint. Check the colour on a colour chart available in the shop. The final colour of painted surface depends, among others, on wood type and quality, its absorptivity and also on the number and thickness of applied layers.

The product should be stored at 5-30oC, in a dry place, in tightly closed original packaging. . Do not expose it to direct sunlight. Keep away from children.

Product treated with biocidal product. Contains C(M) IT /MIT (3:1).
Contains: reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1) and 3-iodo-2-propynyl butylcarbamate. May cause an allergic reaction. VOC content limit: 130 g/l (cat. A/e/FW). Product contains max. 130 g/l.

H412 Harmful to aquatic life with long-lasting effects. P102 Keep out of the reach of children. P273 Avoid releasing to the environment. P501 Dispose of contents/container in appropriately labelled containers for separate waste collection emptied by an authorised company.

Do not empty into drains. Dispose of contents/container to proper waste disposal site.

up to 12 years of protection depending on operating conditions and application.
Protection refers to the durability of the painted protective coating (no flaking). For adequate protection, the product must be applied in accordance with the instructions on the packaging and technical data sheet and under suitable conditions.

The expiration date is on the packaging.